by admin | Aug 22, 2017 | Ieee 2016
INCREASING EFFICIENCY SYSTEM USING PETROL ENGINE BY PRE HEATING METHOD SYNOPSIS The concept of increasing the fuel efficiency of a petrol engine in this project, is to pre-heat the intake air which is flowing through the carburetor. The humidity in the...
by admin | Aug 22, 2017 | Ieee 2016
SYNOPSIS The process of converting hot material into cold is called cooling process. The main aim of the lathe coolant is converting hot input to the cold material. The water pump is used to supply the coolant water into the work piece. The lathe coolant...
by admin | Aug 22, 2017 | Ieee 2016
Objective: The main objective o this project is detect the gas leakage and to control the gas leakage through proper way. Scope: Due to the increased cost of the fuel, most of them prefer in hiring the gas cars instead of petrol/diesel vehicles....
by admin | Aug 22, 2017 | Ieee 2016
SYNOPSIS: In this project “MANUAL COIL WINDING MACHINE” main objective is to bring out a machine which can implement the idea of automation in Transformer winding or any type of coil windings. METHODOLOGY: coil winding roller spur gear arrangement handle...
by admin | Aug 22, 2017 | Ieee 2016
SYNOPSIS Work holding is the most essential act to carry out machining. These are commonly used in the machine shop. To hold the job in proper position To hold the job rigidly To prevent vibration of the job while the machining is carried out....
by admin | Aug 22, 2017 | Ieee 2016
SYNOPSIS A hydraulic fluid power system is defined as a means of power transmission in which relatively incompressible fluid is used as the power transmitting media. The primary purpose of hydraulic system is the transfer of energy from one location to another...